User Manual

- 19 -

The following is a list of the configuration settings that can be changed using the front panel display controls.

1. Select High Definition or Max Density modes

2. Select the operation range of the Base Station

3. Select the microphone mute mode

Note: Switching between High Definition and Max Density modes will cause the Base Station to

automatically reboot.

Revolabs HD Microphones and HD Microphone Adapters

Use any of four microphones with your Revolabs Executive HD ™ System:

Revolabs HD Wearable Wireless Microphone

Revolabs HD Omni-directional Tabletop Wireless Boundary Microphone

Revolabs HD Uni-directional Tabletop Wireless Boundary Microphone

Revolabs HD Universal Wireless Adapter for Handheld Microphones

Using the HD Wearable Wireless Microphones

The Revolabs HD Wearable Microphones, shown in the following figure, are paired to the Base

Station and can be worn on the user‘s shirt pocket, lapel or on a lanyard. They provide high quality

full duplex audio between each user and the conferencing or audio system.

1. Earpiece jack — accepts the 2.5mm plug for the earpiece.

2. Charging port — docks to Executive HD Charger Bases.

3. Pocket clip — also used to attach microphone to a lapel, blouse or lanyard.

4. Mute Button — press to mute, un-mute and pair microphone.

5. Acoustic cover - microphone element end of the device

6. LED display — visual status for mute, un-mute, and pairing.

Note: Microphones in new systems must be paired to the Base Station with each microphone

assigned to a unique channel on the base unit. See pairing instructions below.