User Manual

- 9 -
Scan Network
The ‗Scan Network‘ option of the ‗Box‘ menu will search the connected Ethernet network for all
connected HD Base Stations. A pop-up ‗Equipment List‘ will show all discovered devices and allow
the connection to the selected Base Station(s). Once connected to a Base Station, the HD Control
Panel will open a device tab for each Base Station.
Note: If the „Equipment List‟ does not appear after a network scan has been performed, no devices
or network connections were found.
Set Box Name
A Box Name may be assigned as a Network title for each device. The Box Name can be set by selecting ‘Set
Name’ from the ‘Box’ menu. The corresponding pop-up will show the current box name which can be changed.