User Manual

Page 12
Pairing the Tabletop Dialer to Fusion
1. Press the Menu button to bring up the Main menu and press the down
scroll button to select Configuration and press the Menu button
2. Enter your password if prompted and press the Menu button
3. Scroll down to Pairing and press the Menu Button
4. Place the Dialer within 2’ (60cm) of the Fusion base and press the Menu
button (followed by confirmation Pairing Succeeded or Already Paired to Base)
Note: If the Dialer is already paired to a Fusion System, the RF address must
be reset first before it can be paired to another Fusion System.
Resetting the RF Address
1. Press the Menu button to bring up the Main menu and press the down
scroll button to select Configuration and press the Menu button
2. Enter your password if prompted and press the Menu button
3. Scroll down to Reset RF Address and press the Menu Button
User Guide
Tabletop Dialer Front Keypad (cont.)
Fusion Front Panel
The Revolabs Tabletop Dialer provides convenient dial control and
management of conference phone numbers of the Fusion™ Wireless
Microphone System.
1. 2 Line LCD Display
2. Low Battery Indicator
3. Menu Button
4. Up/Down Scroll Buttons
5. Mute/Call Status Indicator
6. Mute Button
7. Off Hook Button Dial/Re-Dial
8. On Hook Button (End Call)
9. Volume Up / Down Buttons
10. Flash Button
11. Clear Button
12. Alpha Numeric Keypad
Page 5
Revolabs Tabletop Dialer for Fusion™