User Manual

User Guide
Setting Display Backlight Time
1. Press the Menu button to bring up the Main menu and press the down
scroll button to select Settings and press the Menu button
2. Press the Menu button again at Backlight Time and use the scroll buttons to
select between Off, Short (3 seconds) and Long (7 seconds) and press the
Menu button
Setting Display Contrast
1. Press the Menu button to bring up the Main menu and press the down
scroll button to select Settings and press the Menu button
2. Scroll down to Set Contrast and press the Menu Button
3. Use the scroll buttons to adjust the contrast
Display RF Signal Strength
1. Press the Menu button to bring up the Main menu and press the down
scroll button to select Settings and press the Menu button
2. Scroll down to Signal Quality and press the Menu Button
Display Battery Level
1. Press the Menu button to bring up the Main menu and press the down
scroll button to select Settings and press the Menu button
2. Scroll down to Battery Level and press the Menu Button
Page 10
Revolabs Tabletop Dialer for Fusion™
Page 7
Installing Batteries
1. Remove the bottom stand/battery cover by gently depressing the
spring latch with your finger and tilting the cover away from the catch
on the Dialer.
2. Next insert 4 AA Batteries, ensuring to correctly place the polarity of
the batteries as indicated in each battery slot.
3. Re-install the stand/battery cover by placing the bottom tabs into the
slots on the Dialer and gently ensuring the spring latch catches.