User Manual

Page 8
Placing a Telephone Call
There are 4 options for placing a call using the Tabletop Dialer.
1. Enter the phone number you want to dial and then press the Dial button
2. Speed-Dial by pressing a single number that represents one of the stored
phonebook entry number (0-9) and then pressing the Dial button
3. Press the Down scroll button continuously until you get to the Speed-Dial
entry you want to dial and then press the Dial button
4. Press the Dial button (wait for dial tone) then enter the number you wish
to dial. (best option if your phone system requires a pause after dialing 9 to get
an outside line)
Adding Speed-Dial numbers
1. Press the Menu button to bring up the Main menu and press the Menu button
again at the Speeddial option
2. At the Add option screen, press the menu button again and use the Scroll Down
button to navigate to the empty key number you wish to use for Speed-Dialing
this entry, then press the Menu button again
3. At the Entry Name screen use the key pad to enter the name for this entry. Both
lowercase and capital letters are available by continuing to press the numeric
key. For instance pressing the number 2 key continuously you will scroll through
a,b,c,2,A,B,C then back to a. Once you have finished entering the name, press
the Menu button again
4. At the Entry Number Menu enter the number you wish to associate with this
speed-dial number. Note: If your phone system requires a numeric key entry
such as dialing 9 for an outside line, don’t forget to add it.
5. Finally press the Menu button once the number is complete and you will get a
message “Entry Stored”
User Guide
Revolabs Tabletop Dialer for Fusion™
Page 9
Editing Speed-Dial numbers
1. Press the Menu button to bring up the Main menu and press the Menu
button again at the Speeddial option
2. Press the Down scroll button to the Edit option and press the Menu button
3. Use the scroll buttons to get to the number you wish to edit and press the
Menu button
4. At the Entry Name screen use the clear button to delete characters and the
Keypad to edit the name.
5. When done, press the Menu button and you will get a message “Entry
Stored”
Deleting Speed-Dial numbers
1. Press the Menu button to bring up the Main menu and press the Menu
button again at the Speeddial option
2. Press the Down scroll button to the Delete option and press the Menu
button
3. Use the scroll button till you get to the number you want to delete then
press the Menu button and you will get a message “Entry Deleted”
Adjusting Volume
Use the Volume Up/Down buttons to increase and decrease the volume from
Telephone, VTC and Aux inputs sources.
Note: This adjustment controls the far end volume levels of the Room output
only.