Product specifications

49
not automatically reconnect after changing the Region
setting, you need to pair all of them again to your
system.
NOTE: We recommend changing the Region setting only after
previous consultation with Revolabs Support.
Power On/Off the System Components
During normal use and operation of the FLX2 System, there is no need to turn off any
part of the system. However, if the system is going to be stored without the Charger
Base powered on, then each component should be powered off until further use.
Dialer On/Off
To power off the FLX Dialer, hold down the red ‘end call’ soft key until the device asks
whether you want to shut it down. Confirm this by pressing ‘Yes’.
To turn the Dialer back on, either:
1. Hold down the red ‘end call’ soft key until the Dialer powers on.
OR
2. Simply return the Dialer to an active Charger Base and it will power on
automatically.
Speaker On/Off
To power off the FLX Speaker, hold down the button located on the bottom of the
Speaker until the LED indicators on the top of the Speaker turn solid red. Once the LED
indicators are solid red, release the button and the Speaker will power off.
To power the Speaker back on, either: