Product specifications

51
Carefully take the battery out of the plastic cover. Put the new battery into the back
cover as shown in the figure below. Press on the battery until it snaps into the back of
the microphone housing.
Slide the back of the microphone back in place. Place the microphone back into the
charger base. The LED should go on indicating the charge status of the microphone.
Dialer
The battery in the dialer can be exchanged after the
dialer’s back was opened. The back of the dialer opens if
pressure is applied, pushing it back away from the
charger port and lift it, as shown in the picture.
Take the current battery out of the handset as shown, and replace it with the new
battery. Please ensure that the connectors on the battery are lined up with the
connectors inside the dialer.
Speaker
To change the rechargeable battery in the FLX speaker you will need to use a
screwdriver to loosen the screw on the bottom of the speaker.
Once the screw is loose, the bottom door of the speaker will
open, revealing the rechargeable battery pack. Carefully take
this battery pack out of the speaker enclosure, unplugging the
wire.
Plug the new replaceable battery into the connector, and place
it into the speaker. Close the door, and re-tighten the screw.