User Guide

Connecting the UC 1500 to the Computer:

1. Connect one end of the USB cable to your computer, and the other end to the connector on the

bottom of the UC 1500.

2. For call control functionality of supported 3rd party applications on your computer, download and

install the FLX Device Manager from: http://revolabs.com/support/product-line/uc-1500

Safety Warnings:

• Do not expose any of the UC 1500 components to water, moisture, or high

humidity.

• Do not expose any of the UC 1500 components to extreme high or low

temperatures.

• Do not expose any of the UC 1500 components to lit candles, cigarettes,

cigars, or to open flames.

• Do not drop, throw, or try to bend any of the components, as rough treatment

could damage them.

• Do not open the casings of any of the components of the UC 1500.

• Only use Revolabs original accessories intended for use with this product to power the UC 1500.

• The UC 1500 is to be connected only to PoE networks without routing to the outside plant.

• Use of non-original accessories may result in loss of performance, damage to the product, fire,

electric shock or injury. The warranty does not cover product failures that have been caused by use

of non-original accessories.

Manual, Firmware Upgrade, Troubleshooting, Additional Configuration information is available

here: http://revolabs.com/support/product-line/uc-1500