User's Manual

38
Advanced Setup
The following is a list of advanced configuration settings that are protected by a 4 digit
password for administrator access only. The default password is 7386 (revo). This
password should be changed by the system administrator. Please ensure that you take
note of the changed password.
Advanced Audio
Browse to Advanced Audio menu: Menu Setup
Advanced Setup Advanced Audio.
Mic Audio
The ‘Mic Audio’ allows to control the Microphones.
1. If ‘All Mic Mute’ is ON, all active
Microphones are affected when a mute
button is pressed. If one or more active
Microphones are outside the Charger Base,
pressing the mute button will change the
mute status on all Microphones outside of
the Charger Base. Micropphones in the
Charger Base will not be affected and will
stay muted at all times. If all Microphones
are in the Charger Base, pressing the mute
button will change the mute status of all
Microphones in the Charger Base. The
factory default for ‘All Mic Mute’ is OFF.
2. The ‘Start Unmute’ feature allows the
Microphones to come out unmuted when
taken out of charger. The factory default is
ON.
3. ‘Auto Gain’ allows changing the setting for
the Auto Gain features of the microphones.
Auto Gain can be switched ON and OFF
from this menu. It also allows to set the
Target Loudness, Response Time, and
Noise Threshold. Revolabs recommends to
keep the default settings for these.
4. ‘High Pass Filter’ allows to filter out low
frequencies that might cause background
noise in particular environments. Several
levels are provided. The factory default is
OFF.
Aux Audio
‘Aux Audio’ is to control the AUX In and AUX Out
connections on the base.