User's Manual

Revolabs Solo™ Single-Channel – Polycom

SoundStation 2 Setup Guide

NOTES AND CAUTIONS:

This setup guide will guide you through the steps needed to properly connect a

Revolabs Single-Channel device to a Polycom SoundStation 2 speakerphone.

1. Connecting the Cables

2. Configuring the SoundStation 2 speakerphone

Note: It is important to carefully follow these instructions in order and completely. Otherwise,

your Single-Channel System and/or the phone may not function properly. Please read through

these instructions completely before proceeding. Contact Revolabs Technical Support if you

have any questions.

IMPORTANT: This will only work with the SoundStation 2 with LCD screen (expandable

version – P/N 2201-16200-601). The SoundStation 2 models without LCD screen or the

expandable capability do not have the ability to activate an external wireless microphone.

Requirements for connecting systems:

1. Revolabs Single-Channel system

2. Polycom SoundStation 2 speakerphone with LCD screen

3. Qty 1 Revolabs 2.5mm to RCA breakout cable (provided with single-

channel system)

PAGE 1
Revolabs Solo™ Single-Channel – Polycom® SoundStation 2 Setup Guide NOTES AND CAUTIONS: This setup guide will guide you through the steps needed to properly connect a Revolabs Single-Channel device to a Polycom SoundStation 2 speakerphone. 1. Connecting the Cables 2. Configuring the SoundStation 2 speakerphone Note: It is important to carefully follow these instructions in order and completely. Otherwise, your Single-Channel System and/or the phone may not function properly.
PAGE 2
Connecting the Cables CONNECTING A REVOLABS FUSION TO SOUNDSTATION 2 SPEAKERPHONE 1. Connect Single-Channel to SoundStation 2 Auxiliary Audio Port using Revolabs 2.
PAGE 3
Configuring the SoundStation 2 Speakerphone CONFIGURING THE AUDIO MENUS OF THE SOUNDSTATION 2 SPEAKERPHONE 1. 2. 3. 4. Press MENU Button Press SELECT (Checkmark) for Settings Scroll down to AUX AUDIO then Press SELECT Use Soft Keys Right to select WIRELESS MIC then press SAVE NOTES: 1. In this case, Revolabs only recommends using the wearable lapel microphone or using a third-party dynamic microphone with the Revolabs XLR adapter module.