User's Manual

IN
RevolabsFLXUSBAudioConnectorKit
01‐USBAUD35‐KIT
ToconnecttheRevolabsFLXtoyourcomputerusetheRevolabsFLXUSBAudioConnectorKit(01‐USBAUD35‐KIT).
PlugtheStereosideofthecablesintotheUSBaudiodongle,andthemonosideintotheFLXBaseStaon.Ensurethatthe
HeadsetoutputoftheDongleisconnectedtotheINportoftheFLXBaseStaon,andtheMicropho
neinputofthedongle
totheOUTportoftheFLXBaseStaon.
Onceyouconnectthedongletoyourcomputer,theoperangsystemshouldautomacallydetectthedongleasanaudio
device,andloadtherequireddrivers.Nosowareshouldneedtobeinstalledonthecomputer.
OntheFLXDial
ergotoMenu—Setup—AdvancedSetup—AdvancedAudio—AuxAudioandensurethatAuxOutissetto
LINE.BothAuxInandAuxOuthavetobesettoONinthismenufortheaudiotowork.