user manual

Revolabs Single Channel System - Polycom VTX 1000 Setup Guide

NOTES AND CAUTIONS:

This setup guide will guide you through the steps needed to properly connect a

Revolabs Single Channel system to a Polycom VTX 1000 speakerphone.

1. Connecting the Cables

2. Configuring the VTX 1000 speakerphone

Note:

It is important to carefully follow these instructions in order and completely.

Otherwise, your Single Channel System and/or the phone may not function properly.

Please read through these instructions completely before proceeding. Contact Revolabs

technical support if you have any questions.

Requirements for connecting systems:

1. Revolabs Single Channel system

2. Polycom VTX 1000 speakerphone with LCD screen

3. Qty 1 Revolabs 2.5mm to RCA breakout cable (provided with single

channel system)

PAGE 1
Revolabs Single Channel System - Polycom VTX 1000 Setup Guide NOTES AND CAUTIONS: This setup guide will guide you through the steps needed to properly connect a Revolabs Single Channel system to a Polycom VTX 1000 speakerphone. 1. Connecting the Cables 2. Configuring the VTX 1000 speakerphone Note: It is important to carefully follow these instructions in order and completely. Otherwise, your Single Channel System and/or the phone may not function properly.
PAGE 2
Connecting the Cables 1. Connect Single Channel system to VTX 1000 using Revolabs 2.5mm to RCA cable Configuring the VTX 1000 Speakerphone CONFIGURING THE AUDIO MENUS OF THE VTX 1000 SPEAKERPHONE 1. 2. 3. 4. 5. Press MENU button Scroll down to ADMIN SETUP then press SELECT Scroll down to AUDIO SETUP then press SELECT Scroll down to AUX INPUT then press SELECT Use Soft Keys Right to select WIRELESS MIC then press SAVE NOTES: 1.