user manual

Connecting the Cables
1. Connect Single Channel system to VTX 1000 using Revolabs 2.5mm to RCA cable
Configuring the VTX 1000 Speakerphone
CONFIGURING THE AUDIO MENUS OF THE VTX 1000 SPEAKERPHONE
1. Press MENU button
2. Scroll down to ADMIN SETUP then press SELECT
3. Scroll down to AUDIO SETUP then press SELECT
4. Scroll down to AUX INPUT then press SELECT
5. Use Soft Keys Right to select WIRELESS MIC then press SAVE
NOTES:
1. Revolabs only recommends using the wearable lapel microphone or
using a third-party dynamic microphone with the Revolabs XLR adapter
module. Please note that the volume levels of the Revolabs
microphones are not adjustable.
2. The use of Revolabs boundary microphones (omnidirectional or
directional versions) has been tested. The omnidirectional microphone
was found to be equivalent to the VTX 1000 microphones at a 2’
distance. The directional microphone was significantly louder than the
omnidirectional microphone; use of this microphone may overpower
other users on the Polycom microphones (built-in console microphone
and/or external microphones). As above, the volume levels of the
Revolabs microphones are not adjustable.