Product specifications

Charging the Batteries

How to Charge

1. Place microphone(s) into the Executive Charger Base.

2. During charging, the LED indicator turns on (RED) and remains on until charging completes.

The microphones are muted while in the Charger Base. In normal use, batteries should fully

charge in about 2 hours, and can be “quick-charged” to 80% capacity in 45 minutes.

3. When charging completes, the LED turns off and the microphone is ready for use.

Note: A fully charged module battery provides approximately 8 hours of talk time.

When to Charge

First-time use — before using the wireless microphones the first time, charge the self-contained

battery for eight hours (or overnight) in the Charger Base.

Recharging — when the yellow light starts to flash on the microphone the battery needs

recharging. Over time (years), batteries gradually wear down and require longer charging times.

This is normal.

The Lithium Polymer rechargeable batteries that power the microphones are not user

serviceable. Please contact your AV service provider for replacement instructions and to assure

the proper disposal method is used. Warning: Never dispose of batteries in a fire because

they may explode.

Using the Microphone

1. Remove the microphone from the Charger Base. The

microphones turn on and mute themselves automatically

when removed from Charger Base, to reduce noise while

being attached to clothing.

2. The wireless microphone has a clip on the back which allows

the microphone to be easily clipped onto a shirt pocket,

blouse or lapel. The microphone can also be clipped on to a

lanyard and be worn around the neck. Attach the microphone

to clothing or to a lanyard, as close to the mouth as possible

(within 6 - 12 inches is recommended).

3. With the microphone in the wearing position, un-mute the microphone by pressing and

releasing the MUTE button (confirm by viewing flashing GREEN LED).

4. To turn microphones off, return the microphone unit to the Charger Base or press and hold the

MUTE button for ~10 seconds until the LED turns solid RED and release button.

5. If the microphones are moved out of range of the Base Station (~30 meters) the connection will

be dropped (LED flashes all colors) and the microphone will mute. After 15 seconds the

microphone will beep 5 times, and will continue beeping every 30 seconds to remind the user

to return the microphone to the conference room. When the microphone is moved back into

range the connection will automatically be re-established to its original state, and the beeping

will cease.