REVBC-100-C1-US Revolectrix BUMP Control Unit Manual

When you remove the BumpTag from the Bump Zone, the battery details screen closes and the idle

Status screen will now display the current charger setup. This display will contain a list of batteries and

quantities.

Figure 6 - Charger Setup

The top line of the charger setup information gives a summary of how the charger channel will get

configured based on the batteries in the setup list. The chemistry and cell count must obviously be the

same for all batteries in the list (i.e., all batteries in the parallel charge), so that information is only

displayed once at the top of the list. Each different type of battery is then listed as a separate item in the

list. Bumping multiple batteries with the exact same Ratings will increment the battery count (i.e., “x1P).

Bumping a battery with different Ratings will cause a second battery item to appear in the list which

corresponds to that new battery type.

Touching the battery count button (“x1P”) lets you directly change the number of batteries of that type.

This is useful for times when you’re not concerned about tracking individual battery charge counts or

history and want a quick easy way to parallel charge multiple batteries of the same type without having to

bump every one of . You can bump a single BumpTag, touch the battery count button, and select 1 to 8

batteries of that same type.

Touching the battery item itself will open a popup action menu which provides more actions that can be

taken on that particular battery. The following operations can be selected :

• Clear - removes this particular battery from the setup list

• Add/Drop Favs - adds or removes this battery from Favorites (see “Favorites” for details)

NOTE: The charge counter value on the BumpTag isn’t actually

incremented when it is bumped. Once the 10% capacity threshold is

reached, the unique ID of that battery (or batteries) is cached to ensure

the charge counter gets properly incremented on the next bump. This

method works properly even when the battery is charged on multiple

chargers.

NOTE: Bumping a battery which is not compatible with the existing

setup for parallel charging will cause a warning screen to be shown and

the previous setup to be replaced with the new battery.