Quick Start Guide

PREPARE DOOR FOR INSTALLATION

1. Make sure that the following criteria are met so that the

Smart Lock can be installed properly:

Check your door / frame dimensions to make sure that

they ﬁt the following measurements:

①

Check the door status. Make sure the doorframe is

aligned with the door.

There are no obstructions stuck in the doorframe.

①

②

③

Leave enough space for the deadbolt to extend into

the doorframe when the door is locked.

The cross bore diameter 2⅛ (54 mm) or 1½ (38 mm)

②

③

④

Backset 2

⅜ (60 mm) or 2¾ (70 mm)

Diameter of the door hole 1 (25 mm)

Door thickness 1

⅜ (35 mm) - 2 (50 mm)

Backset

2⅜ (60mm) or

2¾

(70mm)

1 ½ (38mm) or

2 (54mm)

⅛



Cross bore