Installation Manual

PRODUCT OVERVIEW

Touchscreen

Fingerprint

Cylinder

Type-C Port

Battery

Cover

Reset

Button

Multifunction

Button

Thumb Turn

DEFINATION

Multifunction Button: Push and HOLD the Multifunction Button on inside panel for 3 Seconds to active Privacy Mode. This will

disable all user PIN code access and APP control. Privacy Mode will be disable autometically after unlock the device with the

Thumb Turn or Mechanical Key.

One Touch Locking: Press and hold Any key on keypad for 2 Seconds to lock the door.

Lock-Out: If you fail to unlock the door for 5 consecutive times using the PIN Key, your Lock will be shut-down for 3 Mins.

Type-C Port: Insert a Type-C cable into the Type-C port and use a portable battery(5V 2A) to power the Smart Lock. If your

device’s batteries are completely ran out.

Reset Button: Push and HOLD the Reset Button for 5 seconds to reset your device. After reset operation, the lock will be restored

to factory default settings, all user credentials will be deleted.

Battery Indicator: The Red LED will ﬂash 3 times slowly if the battery level is lower than 20%. Please replace the batteries as soon

as possible.

Cylinder

Cover