Installation Manual

①
2.
②
③
④
Backset 2⅜” (60 mm) or 2¾” (70 mm)
Diameter of the door hole 1” (25 mm)
Door thickness 1⅜” (35 mm) - 2” (50 mm)
Backset
2⅜”(60mm) or
2¾
”(70mm)
1 ½” (38mm) or
2 (54mm)
⅛
”
Cross bore
(25mm)
1
”
Door
thickness
1⅜” (35mm)-
2
” (50mm)
Door hole
Check your door / frame dimensions to make sure that they fit the following measurements:
The cross bore diameter 2⅛” (54 mm) or 1½” (38 mm)
1.
①
②
③
Make sure that the following criteria are met so that the Smart Lock can be installed
properly:
Check the door status. Make sure the doorframe is aligned with the door.
There are no obstructions stuck in the doorframe.
Leave enough space for the deadbolt to extend into the doorframe when the door is locked.
PREPARE DOOR FOR INSTALLATION
04