Operation Guide

34
3 USER GUIDE
3.8 Factory Settings
The Manager30 is shipped with a number of settings already programmed into the unit.
These settings are set to ensure that the charger will safely charge any battery and may
not reflect the actual requirements for your battery type. It is important to review these
settings and adjust as required.
Setting Factory Value
Battery Type GEL
Capacity 40AH
Charge Mode TOURING
Temperature Scale Celsius
Key Tone Status ON
Contrast 50%
Brightness 90%
Backlight Timer 30 secs
Home Screen Timer 30 secs
Time/Date Format 12 Hour/DD/MM/YYYY
Language English
Max Charge Current 30 Amps
Low SOC Alarm 10%
Low Voltage Alarm 10.5 Volts
Load Disconnect Off
DC Input Trigger Auto
Modification of the ‘Advanced Settings’ menu items affect the way The Manager30 unit responds to charging
situations. Modification of these settings may result in the unit not functioning at 100% of its capacity. These
settings should only be modified if absolutely necessary and when the effects of the changes are 100%
understood.