User Manual

Replacing the Propellers

Expanding the Transmitter to Accommodate a Smart Device

Using the Vizo

™

View XL App

The Vizo View XL app is free software for your 2.4GHz WiFi-

capable smart device allowing you to:

• connect to the Vizo View camera as FPV

• take videos and pictures

• control the Vizo XL drone using a smart device

1. Install the Vizo View XL app from the Google Play or App

Store.

2. Install a micro memory card into the Vizo XL.

3. Connect a fully charged Li-Po battery into the Vizo XL.

NOTICE: When using a smart device to ﬂ y FPV, expect

latency between the smart device and the drone. Keep

your drone within visual range.

NOTICE: The transmitter must stay powered off to

completely control your drone via the Vizo View App. The

Vizo View on-screen control sticks are disabled when

connected to your transmitter.

The propellers on the Vizo XL drone are marked near the

center with an “A” or “B.” If a propeller is ever damaged

and needs to be replaced, always replace the propeller

with the same letter type.

1. Remove the snap-on cap from the propeller hub.

2. Remove the screw holding the propeller in place.

3. Install the new propeller, then replace the screw and cap.

1. Pull the stretch lock button on the back of the transmitter

to the left.

2. Pull each side to the necessary width to accommodate

your desired smart device.