Technical data

Konfiguration M217
14
A/B operation
A/B Operation: 2 displays control one side room amplifier
The Multiroom system from Revox allows one M219 to be controlled by two
M217s, the so-called A/B operation. In this way, for example, an M217 could be
installed on each side of the bed.
In A/B operation, the second M217 has the same address set through DIL
switches 3 & 4 as the first M217, but with DIL switch 2 activated. In this way, the
first M217 works in A and the second in B operation.
This setting is defined through DIL switch 2.
Operation
DIL switch
2
DIL position
A Off
2
B On
2
Both M217 Displays are simply connected in parallel to the M219.
Exception: No A/B operation is possible if connection is made to a Re:system
device.