Technical data

Operation M217
18
Timer selection
Timer 1 has been selected in the
above example. The individual Timers
can be selected with the Timer soft
keys. There are a total of 4
independent Timers to choose from.
If you reach Timer 4, pressing the
softkey again brings you back to
Timer 1.
The Select options
The properties of the individual
Timers can be set with the Select
softkey:
c Switching time
d Weekday
e Volume
f Select timer source
g (Select tuner station)
You can scroll through a loop of the
selection options by repeatedly
pressing the Select key:
The two square brackets […]
indicate that this part can be edited
according to your requirements with
the softkeys
.
Select
Select
Timer 1
Timer 2
Timer 3
Timer 4
Switch-on time [Hours]
Switch-on time [Minutes]
Switch-off time [Hours]
Switch-off time [Minutes]
Weekday [ ... ]
Volume [ ... ]
Timer source [ … ]
(Tuner station [ ... ])