Technical data

Re:control M217
19
c Switching times
Once you have selected a Timer, you
can define the switch on/off times
with the Select softkey. The first time
the Select key is pressed, the first
counter pair appears in square
brackets.
As soon as a timer’s settings are
modified however, this is
automatically activated.
First, using the
softkeys, you
define the switch-on time and then
the switch-off time.
Switch-on Switch-off
| |
Hours Minutes |
| | |
[8]:[15] – [9]:[20]
Please note
If a timepoint is selected for the
switch-off, which is earlier than that
chosen for the switch-on, e.g. 20:15 –
08:30
the switch-on occurs at 8.15pm on
the selected day and switch-off
occurs at 8:30am, on the
following
day
.
Only switch on or off
Sometimes, it is useful just to switch
the music equipment on at a specific
time and switch it off manually, or
vice-versa.
In order to make only one timepoint
active, you select the display **:**
when setting the hours value. This
appears between 23h and 0h and the
minute value is not relevant.
In the above example, Timer 1 starts
at 7:15am and remains active until it
is switched off manually. Timer 2
always switches off at 9:30pm,
irrespective of when it was manually
switched on.
Select