Technical data

Re:control M217
21
e Volume
After selecting the weekday(s), the
next time you press Select, you will
be prompted to set the volume level
that should be used.
Using the softkeys, you set the
volume level between 1 (very low)
and 9 (very loud).
f Select timer source
The Multiroom module timer offers
your three sources that can be
activated when the timer kicks in.
These are Tuner, DVD/CD and
Aux/Server.
Please note
When selecting the source, you
should bear in mind that the source
that will be selected is what was
assigned to the Tuner, DVD/CD or
Aux/Server through the Remote
menu.
If instead of assigning DVD to the
DVD module (Fig c), Aux-1 is
assigned instead (Fig d), the timer
would switch Aux-1 on. (See
therefore next page)
This function can be used specifically
to call up external sources through
the timer.
You must of course make sure that
the external source is also active
when it is called by the timer.
Select
Select
Volume 1
Volume 2
:
:
:
Volume 8
Volume 9