Technical data

Re:control M217
23
Activate Timer
As default, the individual Timers are
deactivated.
As soon as the switching times of a
Timer are modified, the
corresponding Timer is activated
automatically and the small bell
symbol in the top line of the display
changes from showing c to d
Each of the Timers can however be
activated or deactivated manually.
To activate a Timer, selected the
required Timer with the Timer
softkeys. Using the
softkeys, the
Timer can be activated or
deactivated.
Timer status & time display
If one or more Timers are activated,
two bell symbols are displayed when
the M217 is in standby mode. Both
bell symbols only disappear once all
Timers have been deactivated.
The time and the weekday display
are controlled through the Multiroom
module.
Please refer to the
Clock setting
section on page 16 or of the
Multiroom chapter in the
corresponding Operating
instructions.
All Timers
deactivated
One or
more
Timers
active
1
2