Technical data

Re:control M217
2
Wall display M217
Please read these instruction through
completely and carefully before
setting the unit up.
General
Ideally, the wall display is combined
with the M218 keypad to enable
simply and logical operation of your
music equipment.
The four softkeys are assigned
different operating functions,
depending on the menu selection
The Main menu shows information
about the current program, e.g.
multimedia module, CD. The basic
operations such as Source, Track+-,
Volume, etc. are carried out using the
connected keypad M218 or through a
Revox IR remote control.
The Timer menu organises timed
processes in the Multiroom system,
e.g. time, day, volume, source, etc.,
while the Server menu allows you to
control the Music server.
The IR receiver that is integrated in
the display transfers the control
signals to the Multiroom equipment.
Installation height
The ideal installation height for the
M217 display unit is approx. 150 cm /
59 inch (centre of display). This
results in a good reading angle and
comfortable operation of the display
unit/ operating unit combination for
smaller people as well. The operating
unit should be attached below the
display unit.
Multiroom Planer V2.00
The new Multiroom Planner doesn't
just calculate the correct address
assignment for the M219 Side room
amplifiers and M217 Wall-mounted
displays, it also calculates the slot
addresses for the M200 series
Re:control products in the side room.
Take advantage of the possibility to
be able to determine in advance, all
M200, M219 and M217 addresses
simply and quickly and at the same
time save the information as system
documentation. You will find more
information about addressing the
M219 in the side room, on Page 13 of
this manual.
You can download the new
Multiroom Planner V2.00 free-of-
charge from the download area of
the Revox Homepage, under
www.revox.com.