Technical data

Re:control M217
4
Connection
Revox recommends using a 4-lead
telephone cable (1 x 4 x 0.5 mm²) with
an RJ11 plug (6P4C modular) for
connection to the Revox multiroom
system or Revox secondary M219
room amplifier.
Maximum cable length: 100 m
Max. cable resistance: 0.1 Ω /m
The cabling for the combination of
the 217 display and the 218 keypad
should be done as shown in the
drawing. With the combination
solution, the 218 keypad only has a
connection to the 217 display. There
is no direct connection to the
Additional room amplifier.
Connection c comes preassembled
with the combination solution.
M217 M219/ M51/ M100
Via the connection d the M217 is
directly connected to the devices
Re:system M10, M100, M51 or in case
of a Multiroom installation to the
corresponding room amplifier M217.
The ferrite ring is included in the
delivery of the M217 (except for
Feller).
Tip
Before laying cabled, you should
check whether this cable is suitable
for an RJ11 socket.
Combination :
Display unit M217 and
keypad M218 (optional)