Technical data

M217
7
Feller EDIZIOdue 4217.M
The Swiss company Feller offers the
4217.M wall display from their
EDIZIOdue series, which is compatible
with the REVOX Multiroom system.
The wall display should be installed in
combination with the 4218-M keypad. A
connection cable is supplied with the
Feller 4217/4218.XXX.2x1 wall
combination.
Combi solution 4217.M + 4218.M
Advice
The IR receiver must be activated if the
wall display is used on its own without
a 4218.M keypad. In this case, the DIL
switch 1 on the back of the wall display
must be switched on (IR on).
Revox recommends the use of
ITPlus® RJ45 sockets for the
interface to the main system
(Re:system) and/ or the M219 side
room amplifier.
Single socket = 1198-118.XXX.ITS;
double socket = 1198-428.XXX.ITS.
The 1900-0.XXX throughway boxes
are recommended for speaker cable.
Please note
The EDIZIODue wall display may not
be used to switch 230V low voltages.