o M230 WIN App E 2.3.
Content General .............................................. 1 M230 display options......................... 2 System Requirements ...................... 3 Installation......................................... 4 Carry out basic settings .................... 5 Connection Setup .............................. 6 M230 with network integration ........ 7 Multiroom System with slave connection..........................................
Introduction M230 General The Re:control M232 Application (App) for Windows products facilitates the comprehensive operation of the complete Revox Multiroom System. Select the room and operate the various Revox Multiroom System sources with the direct-dial keys. Using the App, the state of the various sources is shown to you in realtime.
Introduction M230 M230 display options Display of the currently selected (Music) source in the main room. As well as the information display in the centre of the display, the specific control softkeys from the corresponding sources are also shown. Timer function display. This function is available if a Multiroom (sub-) module is installed in the Re:system device.
Installation M230 System Requirements System requirements for controlling the Revox equipment via: Ethernet Revox Re:system M10 with integrated Ethernet interface or Revox Re:system M51/ M100 [Slave] with external M202 Ethernet interface. The M10 or M202 Ethernet interface must already be connected with your Ethernet network and must be configured. The complete Multiroom system must have the V2.00 system software, or higher.
Installation M230 Installation When installing the Re:control M230, the Revox equipment should not yet be connected to the computer. on the Revox_M230_ Setup_32_64.exe file. If no other path is defined for the installation, the M230 folder is in the path c:\Program Files\Revox. Double-click Options during the installation: The M230-App can only be operated with a Windows PC and supports Win XP, Win Vista and Win 7 in the 32- and 64-bit versions.
Configuration M230 Carry out basic settings After the program has been installed, a V icon appears in the Status bar on the bottom right of the screen. Right-click on the V icon. Now select the Setup option. You can make essential settings through this overview window. Stay On Top The M230 window always stays on the top screen layer regardless of whether new programs are opened. Start Maximized Currently this has no function. Size (Small – Medium - Large) Here you select the size of the M230 window.
Configuration M230 Connection Setup The access type and its specific settings are selected here. You will find the system requirements for this on Page 3. Serial Port Connection via serial RS232. Directly available in the case of a Re:system M10 or over a Re:connect M200 and M203 interface, which is connected with a Re:system device. USB Link Connection via USB.
Configuration M230 M230 with network integration I have a Re:system M10 Reading out Revox IP address In order to be able to use the M230 App in an Ethernet network, you have to read out the IP address of the Revox Ethernet interface and enter it in the Re:control M230 Connection Setup menu. There is no display with an M10 system that allows you to directly read out the IP address of the integrated Ethernet interface. Connect your computer via USB to the M10 and select the option USB Link (M10).
Configuration M230 I have a Re:system M51/ M100 If you have a Re:system M51/ M100, you can read out the IP address of the connected M202 Ethernet interface directly on the M51 or M100 display. Reading out using an M202 Note down the IP address (192.168.120.200 in this example) and now enter this in the M230's Connection Setup [TCP/IP]. Switch the M51/ M100 on using the Power button on the front of the unit. Now press the small Setup button on the M202 Ethernet interface. Fig.
Configuration M230 Multiroom System with slave connection Control of a Multiroom Slave system with the Re:control M230 In a Multiroom System with a Re:system M100 Slave device, the slave device also requires its own M202 Ethernet interface as well as the main device). However, only the IP address (here192.168.0.5) of the main device (Multiroom central unit) is entered in the Connection Setup. The IP address of the slave device (here 192.168.0.
Configuration M230 Re:control M230 WIN User Manual 10