User manual

Configuration M230
8
 I have a Re:system M51/ M100
If you have a Re:system M51/ M100, you
can read out the IP address of the
connected
M202 Ethernet interface
directly on the M51 or M100 display.
Reading out using an M202
Switch the M51/ M100 on using the
Power button on the front of the unit.
Now press the small Setup button on
the M202 Ethernet interface.
Fig.: M202 with Setup button
The following appears on the M51/
M100 display:
If you now press the Menu key in the
display, the second
TCP/IP Setup page
appears
Note down the IP address
(192.168.120.200 in this example) and
now enter this in the M230's
Connection Setup [TCP/IP].