User manual

Configuration M230
9
Multiroom System with slave
connection
Control of a Multiroom Slave system with the Re:control M230
In a Multiroom System with a Re:system M100 Slave device, the slave device
also requires its own M202 Ethernet interface as well as the main device).
However, only the IP address (here192.168.0.
5
) of the main device (Multiroom
central unit) is entered in the
Connection Setup . The IP address of the slave
device (here 192.168.0.
6
) is automatically determined by the Multiroom cabling
of the M230.