User manual

Installation M230
3
System Requirements
Ethernet
USB
Serial via RS232
Revox Re:system M10 with
integrated Ethernet interface
or
Revox Re:system M51/ M100 [Slave] with
external M202 Ethernet interface
.
The M10 or M202 Ethernet interface must already be connected with your
Ethernet network and must be configured.
The complete Multiroom system must have the V2.00 system software, or
higher.
Revox Re:system M10 with
integrated RS232 interface
or
Revox Re:system M51/ M100 with
external M200/ M203 RS232 interface
.
Setting Serial Port mode RS232 Link
The complete Multiroom system must have the V2.00 system software, or
higher.
Revox Re:system M10 / M51 Mk2/ M100 with integrated USB interface on
the back of the device.
Note: An M51 Mk1 (SN < 3000; red standby LED) does not have a USB
interface and therefore, cannot be controlled by USB.
The complete Multiroom system must have the V2.00 system software, or
higher.
System requirements for controlling the Revox equipment via: