User manual

Installation M230
4
Installation
When installing the Re:control M230,
the Revox equipment should not yet be
connected to the computer.
Double-click on the
Revox_M230_
Setup_32_64.exe
file. If no other path is
defined for the installation, the M230
folder is in the path c:\Program
Files\Revox.
The M230-App can only be operated
with a Windows PC and supports Win
XP, Win Vista and Win 7 in the 32- and
64-bit versions.
Follow the installation routine and only
carry out the recommended USB driver
installation at the end, if you are
planning to operate your Revox
equipment later by USB.
Once installation has been completed,
the connection settings can now be
made - see next chapter.
USB connection
If control should be done by USB, a
Re:system device (M10, M51 Mk2,
M100) will be connected with the
computer by USB after the installation
of the M230. This step completes the
driver installation. Otherwise, under
certain circumstances, there could be
errors with the FTD2XX.DLL file.
Options during the installation:
 Create Desktop icon
 All program to the Autostart folder
Options during the installation:
 Install Revox USB driver (recommended)
 Start Revox M230 terminal
Note for MAC users
If you have MacOS installed on your
computer, you can use the
Re:control
M234 App from Revox in the same way
as the M230.