User manual

Configuration M230
5
Carry out basic settings
After the program has been installed, a
V icon appears in the Status bar on the
bottom right of the screen.
Right-click on the V icon. Now select
the
Setup option.
You can make essential settings
through this overview window.
 Stay On Top
The M230 window always stays on the
top screen layer regardless of whether
new programs are opened.
 Start Maximized
Currently this has no function.
 Default Position
If this checkbox is activated, the M230
window always appears bottom right on
the screen. If the checkbox is cleared,
the M230 remembers its last position
appears there again next time it is
started.
 Show Setup Button
If this checkbox is activated, a Setup
button appears in the M230 menu if
"Main Room" is chosen from the room
selection. With all other rooms, a
Local
button is display regardless of this
function setting.
 Size (Small – Medium - Large)
Here you select the size of the M230
window.
 Default Room
In the case of a Revox Multiroom
System with several side rooms, the
preferred room can be selected here
that should be displayed when the
M230 is started.
 Connection
Calls the Setup window for the
connection settings between the
computer and the Revox equipment.
See next page for description.