User manual

Configuration M230
7
M230 with network integration
Reading out Revox IP address
In order to be able to use the M230 App
in an Ethernet network, you have to
read out the
IP address of the Revox
Ethernet interface and enter it in the
Re:control M230
Connection Setup
menu.
Depending on the Re:system model,
there are different ways of finding out
this IP address.
 For Re:system M10
 For Re:system M15/ M100
 I have a Re:system M10
There is no display with an M10 system
that allows you to directly read out the
IP address of the integrated Ethernet
interface.
Connect your computer via USB to the
M10 and select the option
 USB Link
(M10). in the Connection Setup.
If you now start the M230 and call the
Setup on the M10 (activate the Setup
button in the Re:control M230 - see
Page 5), you can call the TCP/IP menu
using the
Ethernet softkey and read out
the M10's assigned IP address there.
Press the Menu softkey on the first
page (Client List).
The second TCP/IP
Setup page appears.
Note down the IP address
(192.168.120.200 in this example) and
now enter this in the M230's
Connection Setup [TCP/IP].