Installation guide

M208 Manager
Re:control
11
Advanced Mode
The M208 Manager does provide an Advanced Mode
which enables the user to make modifications two
levels lower, on the level of the product files and their
environment. After the first installation of the M208 you
can activiate the Advanced Mode by choosing in the
Menu Tools and then the field options:
The following window appears showing the two
options:
Enable advanced Functions
This Mode allows the user to modify in the project
window the Device Type for one product as well as to
edit the device files (*.mpi-Files).
Enable Expert Functions
In this Mode three additional tools can used:
 IR Scope
 MMC Data Viewer
 Display Dump
Important
By editing the product files (mpi-Files) you may
destroy the ability of the M208 to control properly
the devices. Revox is not able to give support for
problems occuring in the Expert Mode.
Advanced Functions
In the Mode Advanced Functions the user can define
in an opened project the data respectively the device
type (Device Type). Additionally the two functions
Browse and Edit are available.
Device Type
The Device type indicates the IR-Format which is
being used by the device. The product type is already
predefined in the mpi-File and should only be changed
when another product is being defined.
The following product types are listed on the Manager:
 No Device [0]
There isn’t any device defined for this button.
Exception: With this device button a selection of
up to 6 products shall be possible. In order to do
this No Device has to be selected in order to
appear in the Main Menu
Example under TV:
 M51 FM-Tuner [1]
With this adjustment the Tuner of the M51 will be
selected automatically- this includes the
synchronisation routines. (Remark: Please check
the SW and HW requirements)