Installation guide

M208 Manager
Re:control
21
Expert-Functions
When choosing in the Menu Option and then Tools
you can in the Expert-Functions see 3 additional
functions:
 MMC Data Viewer
 Display Dump
 IR Scope
MMC Data Viewer
The MMC Data Viewer shows the memory content of
the MMC card.
Display Dump
From the Display Dump the
content of the M208-Dispalys
can be copied into a temporary
file in order to further process
them in other windows
programs.
Procedure
1. Connect the M208 through the USB-cable with
the PC and start the Display Dump.
2. Choose on the M208 the Display the setting you
want to copy.
3. Decide whether the USB Icon shall be shown
and whether a Display Border around the Display
shall be shown.
4. By using the button Refresh you renew the
content of the display.
5. The button Copy to Clipboard copies the
display content into the temporary memory.
IR Scope (BETA-Version)
The IR-Scope can make an IR-code visible. In order to
do that the M208 does have to be connected with the
PC.
Using the measuring feature Measure you can mark
two points of the IR-signal with the mouse cursor. The
IR-Scope shows in the lower toolbar the time and the
corresponding frequency which is belonging to these
two points.
If you want to measure the carrier frequency take a
package of 10 impulses to reduce rounding and
metering errors. In this case the read off frequency
has to be multiplied by 10.