Installation guide

M208 Manager

Re:control

PC-Connection between PC and M208

On the lower part of the M208 there is the USB-

connection which is called M208 link. You can find it

underneath the cover. Via this connection you can

download a new configuration of the M 208 from the

PC.

Connect the M208 with the USB cable to your PC.

The USB cable is part of the standard delivery

package.

After connecting the M208 with the PC a new

message will appear on the screen mentioning that

a new device with the name Revox M208-USB

Link has been found.

Install the USB drivers

The Revox USB driver is not on the Windows

operating system. This is the reason why the PC

asks you to insall the driver. Revox does not

recommend to choose the windows option “search

for drivers” but to indicate the following directory C:\

Programme\ Revox\ M208\ USB Driver. In this

directory your PC will find the needed driver named

208usb.sys

Follow the Windows installation instructions and

remove after the installation the USB cable from the

M208. When reconnecting the M208 with the PC,

your PC will recognize the M208 automatically.

Remark:

Each USB-Chip of the M208 Remote Control does

have an individual code which will be saved by

Windows. It is now possible that especially WIN98

tries to reinstall the driver, when you are connecting

a second M 208 to the PC. Just ignore this

message until Windows recognizes also this new

M208.

554

USB

Windows PC