Installation guide

M208 Manager

Re:control

Work on the project – Assignments

After you have created a new project the Manager

shows you a new window M208 Project [name xyz].

In this window all 9 source buttons of the M208 can be

seen. You can now put on each of these source

buttons actual sources/products. It starts with the

TUNER and ends with button SOUND.

Just proceed as follows:

• Each button can be configured individually. One

button can control only one device or shows a

selection of up to 6 products/sources (see TV).

• The wished product can be selected in the

Database Browser and with Drag and Drop (or

press with the right finger on to the right button of

your mouse, keep it pressed, move the item to the

button of the M 208 and let it drop there). In the

example below the Revox M51 FM-Tuner is being

dropped on to the button TUNER of the M208.

• In the field Device Name you can change the

device name which shall appear in the Display of

the M208. The name can contain up to 8 digits.

• M51-Select defines if, and which IR-code will be

send after choosing a source button on the M208.

You can choose from all on commands in the M51-

products.

Exception when you choose: NONE

In this case in the product file (mpi) POWER_ON is

explicitly defined. Therefore this command will be

send. In case there isn’t any definition of POWER-

ON, no IR-command will be send while pressing

the source button.