Instruction Manual Video switch M300, M301

M300/ M301 Re:connect
3
M300 SCART version
The M300 is connected to the
M51 DVD MKII module using a
fully switched, 21-pin SCART
cable as shown in the figure
below. The SCART cable
delivered with the M51 fulfils
these requirements perfectly.
Important
The M300 only works together
with the DVD MKII Module (Part
no.: 1.551.083.02). The DVD
MKII module is easy to
recognise as it has an optical
digital output, as opposed to the
MKI module that has a coaxial
digital output.
In order not to reduce the
picture and sound quality, the
complete cable length (M51-
M300 + M300-Monitor) should
not exceed 10 m.
M301 RCA plug version
You will need two RCA stereo
pairs for the video signals and
two RCA stereo pairs for the
audio signals to connect the
M301 with the M51 DVD RCA
module.
Additionally, the M301 and the
M51 are connected with a
patch cable (a screened and
uncrossed RJ45 cable) for the
control functions.
The complete cabling locks like
the following:
In order not to reduce the
picture and sound quality, the
complete cable length (M51-
M301 + M301-Monitor) should
not exceed 10 m.