Operation Manual


USER GUIDE
Page
Re:source M37 audio server
SYSTEM SETTINGS
This chapter describes the advanced
settings that you can access from your
Audio Server’s Settings 
To access the Settings menu:
Press the
J
Menu key on your
remote control to display the
Main Menu
Use the
U
and
V
keys to
highlight the Set Up
Press the
O
Select
Use the
U
and
V
keys again to
highlight the Settings
Press the
O
Select
The following screen is displayed:
The following sections describe each
of the options available from the
Settings
CONNECTION SETTINGS
This section allows you to specify
how your Audio Server accesses the

•
•
•
•
•
Edit Internet Access to choose
between Ethernet, Modem or None
as the connection type and press the
M
Save key to commit any changes

Edit Ethernet Settings
If you have selected Ethernet as your
chosen Internet Access method,
you will need to choose between
DHCP and Static as the Ethernet
ModeEdit Ethernet Settings
and specify DHCP as the Mode if
your Audio Server is connected to a
network with a DHCP server present,
and the Ethernet settings should be

select Static as the Mode and a

the Ethernet Settings screen:
Enter your own Ethernet details in the
IP Address, Subnet Mask, Gateway
and DNS
M
Save key
