Operation Manual


USER GUIDE
Page
Re:source M37 audio server
In addition, you can also enable or
disable Auto Output. This option
dictates whether a remote control

a particular audio output will
automatically switch the Audio Server
to control the assigned output when
a button is pressed on the remote

using this feature, see the section
entitled Remote Control Use in a
Multiroom System 
The Screensaver
The Audio Server is equipped with a
screensaver which will activate when


may choose to disable the screen
saver or alter the time delay before it

Note: It is strongly recommended that
you leave the screensaver enabled
if you are using a plasma or rear
projection television to display the

SYSTEM INFORMATION
The System Information screen
displays information about the

such as the serial number and the
version number of the software

You may need to quote this
information if you contact your dealer

On this screen there is a also a Reset
System option available by pressing
the
M

Select this option and press the
O
Reset Defaults key to return your
Audio Server to its default factory

M
Clear Content option to remove all
the music from your Audio Library
If you choose to clear all the content
from your Audio Library you will
be asked to enter a password to

ResetMyMusic
Note: If you perform either of the
above two actions, you will not be

SOFTWARE UPDATE
SETTINGS
In the unlikely event that a software
update attempt fails, you may need

scenario arises, contact your dealer or
