Operation Manual
Page
USER GUIDE
Re:source M37 audio server
CONFIGURING YOUR
REMOTE TO CONTROL
OTHER DEVICES
The TV and Amp keys on the
remote control may be individually
To congure the remote to control
your television:
Press the TV and
O
Select keys
simultaneously; hold them down
Enter the 3 digit numeric code
matching the manufacturer of
your television from the list in
Appendix A
Press the TV
The TV key will blink twice to indicate
TV key does not
blink begin the process again, taking
care to enter the number exactly as
process, entering the correct code
will cause the television to go into
procedure, pressing the AMP key in
place of the TV key, and using the
appropriate numeric code for your
•
•
•
REMOTE CONTROL USE IN A
MULTIROOM SYSTEM
Your Audio Server remote control can
press indicates to the system which
that whenever infrared is received by
the Audio Server the TV display will
automatically switch to controlling
To congure the remote with a
default output
Press the Audio Server and
O
Select keys simultaneously;
The Audio Server key will remain
process must be completed during
Enter the 3 digit code
corresponding to the output
you would like to control (valid
Appendix A
press:
0, 0, 2
Press the Audio Server button
The Audio Server button will
blink twice to indicate that the
the Audio Server button does not
blink twice begin the process again,
taking care to enter the number
Pressing any navigation key on the
remote should now cause the Audio
The remote control can still be used
to control a different audio output
in the normal way; pressing the
Home Output key will return it to
•
•
•