Technical data

I/O Module Re:source
14
Individual level
modification
The I/O module offers the
option found in professional
studio technology, to adjust the
levels of the individual analogue
inputs against each other. With
this function, a quieter CD
player could have its level
raised so that no volume
adjustment is necessary when
switching between sources.
If you want to edit this function,
you must first select the source
in question through the
SOURCE menu.
You can choose from:
Aux-1, Aux-2, Aux-3, Rec-In
The SOURCE menu is called
by pressing the Setup button
for approx. 2 seconds and then
pressing the Source softkey.
The following menu appears in
the display with the Level
Adjust display in the middle.
The standard setting is with the
bar positioned in the middle. In
this position, the signal is not
modified.
If you want to lower or raise the
level of this source, press the
-Level or Level+ softkeys
accordingly. In this way, the
level can be modified by ± 10
dB.
The change can be heard while
you are making it as the output
of this source gets quieter or
louder.
If the levels are set correctly,
there shouldn't be any volume
difference between the adjusted
analogue source and the M51
tuner.
If this is not the case, carry out
the adjustment again. Once you
have achieved the required
level, you can quit the Level
function by pressing the Source
or Amplifier buttons.