Technical data

DVS-5 Module
Re:source
4
DVS Connection panel
PROGRESSIVE
VIDEO
Y
cb
cr
HDMI
HDMI Digital Output
Connect the HDMI interface on
the M51 with a picture repro-
duction device that also has an
HDMI interface. The DVS module
also supports the HDCP copy
protection.
In the case of devices that only
have one DVI input, i.e. a digital
interface only for picture data, you
can alternatively establish a
connection with an HDMI to DVI
adapter cable. At the end of this
manual, you will find the
specialist terminology explained
in the Multimedia Glossary.
Audio output through HDMI
The DVD module makes
possible an output of digital
audio signals in stereo. A change
is necessary on the DVD module
OSD menu for this purpose.
Through the OSD, call the Setup
Ô Audio Ô Digital output menu
and select the PCM only setting.
Note
In the PCM only setting, the 5.1
Decoder module will also only be
supplied with stereo data. A 5.1
multi-channel reproduction such
as Dolby Digital or dts is then not
possible.
You cannot use both outputs, i.e.
HDMI and components output at
the same time.