Technical data

DVS-5 Module
Re:source
6
DVS General
The DVS module has a particular
position within the M51 modules. It
is only there to prepare the DVD
drive’s digital picture data in such
a way the connected picture
reproduction devices can achieve
an optimised picture result.
For this reason, no new source
appears in the Source menu
after installing the DVS module.
There is just an additional Setup
menu point in the DVD setup.
You cannot operate a DVS
module without a DVD module.
The digital video scaler form
Revox has been optimised to
work with HDMI-enabled Revox
products. It can however, also
support other devices.
An optimised picture can only be
achieved with a Video DVD.
Because of their data-reducing
compression, Video or Super
video CDs are not suited for
producing optimised picture
reproduction.
DVS Setup
All settings for the DVS module
are done through the DVD Setup
submenu.
To do this, select DVD from the
Source menu. Press the Source
key on the M51 and then select
the DVD/CD source through the
softkey.
After that, call the DVD setup by
pressing the Setup key on the
front of the M51 for about 2
seconds and then selecting the
Source softkey.
The following display appears:
Using the Scaler softkey, you can
modify the resolution and the out-
put format of the video signal.