Technical data

DVS-5 Module
Re:source
7
Scaler setup
The DVS module offers the most
important picture parameter and
basic settings on two pages. You
can toggle between the two
setup pages with the menu
softkey.
Page 1 offers you the settings for
resolution, saturation and
sharpness.
Page 2 allows the adjustment of
the picture size as well as the
various output options for the
digital HDMI and also for the
analogue output.
Resolution
With the Resolution softkey, you
can adjust the resolution to
achieve the best results for your
picture reproduction device.
The optimised picture quality can
only be achieved, when the digital
picture signal corresponds to the
actual native (optical) resolution
of the plasma or LCD panel. That
is to say when the pixel count in
both the vertical and the
horizontal match.
Many devices will accept a lower
resolution but you sacrifice
sharpness and details through
scaling errors. If the picture signal
has too high a resolution for the
panel, this too high resolution
value will be calculated
downwards in the device, which
also leads to visible interference
and a resulting loss of sharpness,
caused through scaling errors.