Re:control M207 Touch Screen Remote Control User’s Manual
Preface Preface About this manual This manual is designed to make using the Re:control M207 Remote Control as easy as possible. Information in this document has been carefully checked for accuracy and is subject to change without notice. Copyright © Copyright 2004/8 This document is protected by the international copyright law. No part of this publication may be reproduced by any means without the permission of REVOX GmbH in Germany. The information provided from REVOX GmbH is believed to be accurate.
Table of Contents PREFACE ....................................................................................................... I TABLE OF CONTENTS ............................................................................... 1 CHAPTER 1 INTRODUCING RE:CONTROL M207 ............................... 3 1.1 RE:CONTROL M207 FEATURES ...................................................................... 4 1.2 UNPACKING THE RE:CONTROL M207............................................................... 4 1.
Re:control M207 User’s Manual 3.7 PRE-CODE ............................................................................................... 34 3.8 LEARNING ................................................................................................ 37 3.9 LEARN A CYCLE KEY................................................................................... 39 3.10 DELETE DEVICE/KEY CODES ...................................................................... 41 3.11 CREATE A MACRO ..........................
Chapter 1 Introducing Re:control M207 Congratulations on your purchasing Re:control M207 Remote Control. The Re:control M207 is a digital Universal Remote Control with smart function design that is easy to configure and use, enabling you to control all your IR equipped electronic devices. One of the main features is the touch screen control panel, which could integrate the number of remote controls in one and reduce the number of buttons for each device.
Re:control M207 User’s Manual 1.1 Re:control M207 Features This following list identifies Re:control M207 key features. For more information on getting the most, please refer to the following chapters. 1. Control up to 64 devices including VCD/DVD, TV, Satellite, VCR, CD/MD, Receiver/Tuner, Tape, etc. 2. Large LCD touch-screen display with automatic backlighting for visibility in dim environment. 3. Direct access buttons for accessing frequently used functions such as volume, channel, play, mute and stop.
Chapter 1 Introducing Re:control M207 1.3 Installing Battery Please refer to the following illustration and instructions for inserting the batteries 1. Remove battery cover. 2. Insert batteries. Ensure that you insert the batteries according to the marking inside the battery case. Figure 2-1: Inserting the batteries The battery compartment is located at the back of Re:control M207. 1. 2. 3. Put your thumb in the battery cover slot and pull to remove the cover.
Re:control M207 User’s Manual 1.3.1 Precautions for using battery Please pay attention to the following instructions: 1. Be sure that the positive (+) and negative (-) polarities of each battery match the polarities indicated in the compartment. 2. Do not expose the batteries to excessive heat or flame. 3. Keep the batteries away from children. 4. Low power batteries will reduce the effective distance of the unit. 5.
Chapter 1 Introducing Re:control M207 1.5 Identifying Components Please refer to the following illustrations to identify the components of the Re:control M207. This section provides you an overview of the Re:control M207. For the detailed description on operation, please refer to Chapter 3. 1.5.1 The front side of the re:control M207 1. Light Sensor (P.53) The Light Sensor will detect the ambient brightness or dimness to control the backlight whether turn on or not. 2. LCD (P.
Re:control M207 User’s Manual 1.5.2 The rear side of the Re:control M207 1. IR Port You can point the IR port at the IR receiver of targeted device to control the unit. 2. Reset switch You can reset the Re:control M207 while the Re:control M207 can’t work properly or hang on. 3. Back label Back label marks the model number and the briefly specifications. 4. Buzzer hole Beeps signal are released from here. 5.
Chapter 1 Introducing Re:control M207 1.5.3 Direct Access Buttons (Rubber Buttons) The Direct Access Buttons provide you with easy access to often-used functions such as volume and channel control, fast forward and fast reverse, play and stop, etc. Before use, you have to set up the Re:control M207 first. (Refer to Chapter 3 How to Set Your Re:control M207, Page20.) Figure 1-3: Direct access buttons Setup mode function n ● ● o p Enter the setup menu by press it for about 1 second.
Re:control M207 User’s Manual * These buttons function differently according to the currently selected device. 1.5.4 LCD Touch Screen The LCD (Liquid Crystal Display) touch screen enables you to configure and operate your Re:control M207 with the touch of a finger. 1.5.5 Precautions of using touch screen Please pay attention to the following instructions: 1. 2. 3. 4. 5. 6. 7. 10 Do not tap the LCD touch screen fiercely. Tap the LCD Touch Screen gently.
Chapter 1 Introducing Re:control M207 1.5.6 Touch screen keys The touch screen keys enable you to control your devices as you would do with your original remote control. Besides, you can set up macros, program timers and cycle key and configure the LCD screen as many as you want. Figure 1-4: Touch screen buttons It is very easy to use the touch screen. You just need to tap the soft buttons to active the specific function. As Figure 2-3, each button with functionality is stated as below.
Re:control M207 User’s Manual y Main Menu Press the Menu button to call out the Main Menu. The access to Timer Macro. n o The access to the basic information about the remote. Device key p q Tap the right or left icon to change the pages. r Page indicator. It means that there are totally 2 pages and you are in the first one. There are totally 8 pages in Main Menu. y Device Layout Tap the device key directly to enter the device page. 12 n TV Device name (P.20 ) o Soft key in the device (P.
Chapter 1 Introducing Re:control M207 y Basic Information Layout After pressing the icon, you can get the basic information as follow: n Date information (P.52) o Time information (P.52) p Buzzer information (P.52) q Batteries power indicator ( P.52) r Program version s Pre-programmed code version y Timer Macro Layout After pressing the icon, you can get the Timer Macro layout as follow: n Tap the Timer Macro key directly to start the macro function. (P.
Re:control M207 User’s Manual y Setup Menu Layout When you are under the setup status you will see the icons as followed: n Help Guide. Tap this icon to get the setup process information. You can press or to read the information pages. After reading the tips, press “ Enter” button to exit. o Under the setup mode you will see the icons show on the top right of the screen. The fast way to edit the Re:control M207 is tapping the icon directly to exchange the edit functions directly.
Chapter 1 Introducing Re:control M207 Timer Macro Setup Mode o Tap the icon directly to exchange the functions in Timer Macro. Add / Edit the Timer Macro Re-label the Timer Macro Delete Timer or Macro View Macro processes * When you are adding or editing the macro processes two icons shows as below: n When setting the Macro processes tap this icon to goes back to last Macro step.
Chapter 2 Quick Start In this chapter, you are able to know how to set up the Re:control M207 quickly without through complicate procedure. When turn on the Re:control M207, at first you will see the welcome greeting message shown on the screen. From now on, you formally enter the setup procedure. Please operate by the following instructions step by step. 2.1 Re-calibrate the screen 1. 2. Press button for 1 second for entering Setup Menu.
Chapter 2 Quick Start 2.2 Date / Time setting 1. 2. Press button for 1 second for entering Setup Menu. or buttons to choose Setting item Scroll the and press button for entering “Setting” menu. 3. Scroll the or buttons to select Date item button for confirmation. After that, you will find and press the year column with underline and means it is ready to be input current date by pressing and button, and you are able to move the underline forward and backward to target any column by pressing and button.
Re:control M207 User’s Manual 2.3 Device setting 1. 2. Turn on the targeted device for the Re:control M207 to setting the device. The Re:control M207 will directly get throw the setup mode when you operate the Re:control M207 at first time. Please tap the target device key in the Main Menu to enter “Setup device” menu. (ex. “TV” device) * Pre-code: load pre-programmed IR code from the factory default (no guarantee being able to control all brand devices). 3.
Chapter 2 Quick Start If you didn’t get completely correct remote codes from “Pre-programmed code list” item, or you did wrong steps, please try the other ways to re-setup or supplement. a. Use Pre-code function to load current remote codes. (Please refer to 3.1.2 A. Pre-code page22.) b. Use Learning function to learn all or part of correct remote codes. (Please refer to 3.1.2 B. Learning page24.) Since now, you are able to control your devices by the Re:control M207.
Chapter 3 How to Set Your Re:control M207 In this chapter, you can find all the topics about how to setup the Smart Remote. Each topic has its detailed instruction. You can easily customize the Smart Remote by the procedures. 3.1 Add a Device With the function, you are able to create a new device for the Smart Remote. There are two main stages for you to add a device successfully. The first one is to create a new device in the main menu.
Chapter 3 How to Set Your Re:control M207 4. Please choose two points within the desired block on LCD. A “v” symbol will appear where you tapped. After you determine the second point, the key frame will show up on the screen automatically. Tap the frame to confirm the location. If you want to relocate the points, you can press the button to quit. a. The size of the key will depend on the points you choose. b. You cannot setup a device that will overlap the adjacent keys. 5.
Re:control M207 User’s Manual 7. Finally, please decide how you will load the IR remote codes for the device. There are three choices for you: “Pre-code”, “Learning” and “Done”. More detail please refer to the following sections to get further understanding. 3.1.2 Load the codes for the newly-added device When adding a new device successfully, you will be asked if you will load the codes for your device. There are two ways to load IR remote codes for your newly-added device: “ Pre-code” and “ Learning”.
Chapter 3 How to Set Your Re:control M207 When you are in this page, you will find out an icon located on the top-right position. It is “Key Pad Entry” function. You can key in the number for your codes directly by searching from the “Pre-programmed code list”. In this way, you can save some time than using the auto searching function. However, each brand may have several codes. You may need to load the codes to test the correct codes for your device. 3.
Re:control M207 User’s Manual B. Learning With the function, the Re:control M207 is able to learn IR remote codes directly from your original remote. You can also control your device if you fail to get the right remote codes in the pre-programmed code database. When using the learning function, please have your original remote pointed to the “Learning Eye” at the bottom of the Re:control M207 as the Figure 3-1.
Chapter 3 How to Set Your Re:control M207 1. When you successfully add a new device, please decide if you continue to load the codes for the device. Choose the “ Learning” item, to get the remote codes. 2. The specific key needs to be learned will be shown in black on LCD. The Re:control M207 will automatically guide you to learn the remote code for each key one by one. However, you can also change the sequence as you like by taping any key you want to learn.
Re:control M207 User’s Manual 4. 5. The symbol will show up when the Re:control M207 learns remote codes successfully. However, the symbol will show up when the Re:control M207 fails to learn the remote codes. If the Re:control M207 fails to copy the remote code please repeat step3. Please press the button when you finish learning all keys. learning successfully Learning fail The preset layout for your device may not match your original remote completely.
Chapter 3 How to Set Your Re:control M207 4. Please choose two points from the blocks on LCD. A “v” sign will appear where you tapped. After you determine the second point, the key frame will show up on the screen automatically. Tap the frame to confirm the location. If you want to relocate the points, you can press the quit. a. b. button to The size of the key will depend on the points you choose. You cannot setup a soft key that will overlap the adjacent keys. 5.
Re:control M207 User’s Manual 3.3 Add a Text With the function, you are able to add a description for a specific device or soft key. 1. Please press the button for 1 second to enter Setup Menu. And then enter “Key Layout” menu. 2. Please choose the “ Add Text” item and then you will enter the submenu. 3. On tapping the soft key, you will see the indication for the function. After reading the tips, please press the button to go to next step. 28 4. Please choose two points from the blocks on LCD.
Chapter 3 How to Set Your Re:control M207 a. The words you can add to the description will depend on the points you choose. b. You can add a text to not only for a specific device but a soft key. To add a description to a soft key, you just need to choose the specific device in advance and follow the former steps. 3.4 Re-label a Device, Key or Text With the function, you are able to rename a device, soft key or text. button for 1 second to enter Setup Menu. 1.
Re:control M207 User’s Manual Select letters key to select the Tapping the capital letters, lower case letters or special text for your selection. Select Icons Tapping the symbols. key to select more key if you want to delete Delete letters/icon Tapping the the letters or symbols. Next row: Tapping the And then press the 6. key to enter the next row. button to confirm your decision. If you want to re-label the text, please select the text you want to change and follow step 4.
Chapter 3 How to Set Your Re:control M207 3.5 Re-size a Device, Key or Text With the function, you are able to re-size a device, soft key or text. You can also use the function to change the locations for them. 1. Please press the button for 1 second to enter Setup Menu. And then enter “Key Layout” menu. 2. Please choose the “ Re-size” item and then you will enter the submenu. 3. On tapping the soft key, you will see the indication for the function.
Re:control M207 User’s Manual frame will show up on the screen automatically. Tap the frame to confirm the location. button to If you want to relocate the points, you can press the quit. The way to re-size a soft key is similar to the way to add a soft key. You cannot revise a soft key device that will overlap the adjacent keys.
Chapter 3 How to Set Your Re:control M207 3.6 Delete a Device, Key or Text With the function, you are able to delete a device, soft key or text. 1. Please press the button for 1 second to enter Setup Menu. And then enter “Key Layout” menu. 2. Please choose the “ Delete” item and then you will enter the submenu. 3. On tapping the soft key, you will see the indication for the function. After reading the tips, please press the button to go to next step. 4. Please select the device you want to delete.
Re:control M207 User’s Manual 8. Please press the function. button to exit after you finish the delete If you have saved the remote codes in the device or the soft key, “Delete” function will erase not only the icons but also the remote codes. You will see a message to confirm your decision, when the Re:control some codes are saved in your target. 3.7 Pre-code The Re:control M207 is equipped with a mass pre-programmed code database. With the function, you are able to load the code for your device.
Chapter 3 How to Set Your Re:control M207 6. Please select the brand of your device. You just need to select the first letter of your brand. For example, if your device belongs to Sony, please select “S” as your brand n. In this page, you will find out an icon . It is “Key Pad Entry” function. You can key in the code number for your device directly. In this way, you are able to save the time to load the corresponding codes. However, each brand may have several remote codes.
Re:control M207 User’s Manual doesn’t included in the Re:control M207 pre-code database.
Chapter 3 How to Set Your Re:control M207 3.8 Learning With the function, you are able to use the Re:control M207 to learn IR remote codes directly from your original remote. You are able to control your devices with the Re:control M207, even if the code for your device is not included in the database. a. b. Although the learning function is able to copy almost all the IR remote codes. There are still very few special codes that the Re:control M207 cannot learn directly.
Re:control M207 User’s Manual 1. Please press the button for 1 second to enter Setup Menu. And then enter “Code Setting” menu. 2. Please choose the “ Learning” item and then please press the button to enter the submenu. 3. You will see the help guide for the learning function. After reading the tips, please press the button to go to the next step. 4. Please select the device which you want to catch the remote codes. 5.
Chapter 3 How to Set Your Re:control M207 press the specific key on your original remotes for about 2-3 seconds until the symbol 7. The symbol shows up on LCD. will show up when the Re:control M207 learns will show up remote codes successfully. However, the symbol when the Re:control M207 fails to learn the remote codes. Please repeat step 5. to learn the remote code if the Re:control M207 fails to copy it. 8. Please press the button when you finish learning all keys.
Re:control M207 User’s Manual 3. On pressing the soft key, you will see the direction for the function. After reading the tips, please press the button to go to the next step. 4. Please choose any of keys (except Device key) you will use as Cycle keys. 5. Please have your original remote pointed to the ”Learning Eye” at the bottom of the Re:control M207. And then press the corresponding key on your original remotes for about 2-3 seconds until the symbol shows up on LCD.
Chapter 3 How to Set Your Re:control M207 3.10 Delete Device/Key codes With the function, you can delete the codes in the keys. button for 1 second to enter Setup Menu. And 1. Please press the then enter “Code Setting” menu. Del.Code” item and then enter the submenu. 2. Please choose the “ 3. On pressing the soft key, you will see the direction for the function. After reading the tips, please press the button to go to the next step. 4. Please select the device you want to delete.
Re:control M207 User’s Manual 3.11 Create a Macro The “Macro” function enables you to send a series of commands with just one key. The features for Macro function are as follows: 1. You can save up to 60 commands with in one Macro key. You can use any keys except Device key as your Macro. 2. You are able to setup some delays between two commands. 3. You can go to the Main Menu and press the top-left icon to access “ Timer Macro” function. 4.
Chapter 3 How to Set Your Re:control M207 device key, Macro key and Cycle keys.) for the Macro key. You can save 60 commands at most in a Macro. a. You can press the icon command you select. b. You can press the icon o to setup the delay between two commands from 0 to 30 seconds. 5. Please press the n to go back the former button to confirm your decision. When you have set a soft key as a Macro key, a specific sign will be marked a black triangle on the key.
Re:control M207 User’s Manual An Example to Add a Macro The basic devices in operation: 1. 2. 3. 4. 5. Turn the TV on. Switch the TV to video mode. Turn the DVD on. Create a two-second delay. Instruct the DVD to play a disc. The commands for the Macro key. 1. 2. 3. 4. 5. 6. 7. 8. 9. Press the TV device button. Press the Power buttons. Press the TV/Video button. Press the DVD device button. Press the Power button Press the Time Delay icon. Use the Up and Down arrows to select a time delay.
Chapter 3 How to Set Your Re:control M207 3.11.2 Timer Macro A. Create a Timer Macro The “Timer” function enables you to set up devices to turn on at specified times. It can be used to operate a Macro function automatically at a specific time. The function helps you to record movies, turn on music, act as an alarm clock, or implement Home Automation. You can enjoy the marvelous convenience after setting the Timer Macro. The Re:control M207 is quipped with 32 sets of Timer Macros. 1. 2. 3.
Re:control M207 User’s Manual at the top-left a. You can press the icon corner to go back the former command you select. b. You can press the icon to setup the delay between two commands, if your device needs time to responds from 0 to 30 seconds. 46 5. Please press the button to confirm your decision. And then please decide if you will setup a Timer for the Timer Macro. 6. If select “No”, you can confirm and exit the Macro setup commands. You can repeat the step3-5 to setup more Timer Macro.
Chapter 3 How to Set Your Re:control M207 a. In setting the Timer, you need to make a choice between date and weekday. b. If a Timer Macro has been set, A tinny mark been shown beside the Macro key will If the Macro has been set, the symbol will been shown next to the Macro key. If the Timer has been set, the symbol will been shown next to the Macro key. Example indicates as follows: B. Delete Your Timer Macro With the function, you are able to delete Timer Macros as your will. 1.
Re:control M207 User’s Manual If you delete the Timer Macro, you will erase the Timer along with it at the same time. C. Re-label Your Timer Macro With the function, you can easily re-label your Timer Macros. 48 1. Please choose the “ submenu. 2. 3. Please select the Timer Macro you intend to re-label Please key in the new name for the Timer Macro. And then press the button to confirm your decision.
Chapter 3 How to Set Your Re:control M207 You can also press the” Icon” key to add different icons to the Timer Macro. D. View Your Timer Macro With the function, you are able to view all the Macro commands and the timer in the Timer Macro you selected. 1. Please choose the “ the submenu. view” item and then your will enter 2. Please select the Time Macro you intend to view. 3. Please press and to view the commands in turns. at the top-right 4. Please tap the icon corner to view the timer.
Re:control M207 User’s Manual 3.12 Create Your Favorite Channels You can use Macros to save the channels you like. In this way, you are able to get your favorite channels just by taping Macros. There two main steps you need complete: Add some soft keys as Macros and Set these Macros as your favorite channels. 3.12.1 Add the favorite channel keys 1. 2. 3. 4. 50 Please decide the place where your favorite channels will be located. You can create these keys in any device or just in the Main Menu.
Chapter 3 How to Set Your Re:control M207 3.12.2 Set these Macros as your favorite channels 1. 2. 3. 4. 5. 6. It is the same as the way to set Macro. (Please refer to 3.11.1 Macro on page 42 )Please enter “Macro” in “Code Setting”. And then choose one of the soft keys you just created as your Macro key. After selecting one soft key, please enter your TV device and key in the number of your favorite channel for the new Macro. In this way, you have successfully created one Macro as your favorite channel.
Re:control M207 User’s Manual Chapter 4 Menus 4.1 Setting The steps to enter the setting menu for detailed settings are as follows: 1. Press button for 1 second for entering Setup Menu. or and choose “ setting” item, 2. Scroll the cursor button for entering “ Setting” menu. then press 3. Select the items as follows to setup your the Re:control M207. 4. Press , buttons or tap the screen to select the item. The item you select will be marked in black. 5. You can press or to change the pages. 6.
Chapter 4 Menus Date Time Buzzer Power Contrast 1. You can use the function to setup the date for your remote. or to choose the year, month and 2. Please use date. or to change the numbers. 3. Please use 4. Please press to save your setting or press to exit without saving the setting. 1. You can use the function to setup the time for your remote. or to choose the hour, minute and 2. Please use time system. (24hr / 12hr ) or to change the numbers. 3. Please use 4.
Re:control M207 User’s Manual LCD Off Light Sensitivity Light Period 54 1. You can use the function to change the lasting time for the LCD. or to change to lasting time for the 2. Please use LCD. 3. LCD can last for 600 seconds at most.(Disable/10sec ~600sec) 4. You can use the function to change the consumption of electricity. 5. Please press to save your setting or press to exit without saving the setting. 1. You can use the function to change the light sensitivity of the Re:control M207.
Chapter 4 Menus Motion 1. The Motion Detector will sense any movement and turn on the LCD automatically. 2. You can use the function to change the sensitivity of Motion detector. (Off/ Slow / Medium / Fast). or to change to sensitivity of Motion 3. Please use Detector. 4. The more sensitive (eg:Fast), the more easily for the Re:control M207 to turn on its LCD. 5. You can use the function to change the consumption of electricity. 6.
Re:control M207 User’s Manual 4.2 Key Layout 1. To add your devices to the Re:control M207. Add Device 2. You can use “Pre-code” or “Learning” to load the codes for the device by the way. 3. (Please refer to Chapter 3.1 Add a Device on page 20.) Add Key Add Text 1. To add a description for a specific device key or a key. (See 3.3 Add a Text on page28.) Re-size To resize a specific device key or a key or a text. You can also change the location of keys with the function. (See 3.
Chapter 4 Menus 4.3 Code Setting Pre-code To load the pre-programmed codes for your devices. (Please refer to 3.7 Pre-code on page 34.) Learning To use the function to learn the IR codes from your remotes. (Please refer to 3.8 Learning on page37.) Macro Cycle Del. Code To add Normal Macros to your Re:control M207. You can use all the keys as your Normal Macros except device keys. *You cannot setup a timer for a Normal Macro. (Please refer to 3.11.1 Macro on page 42.
Re:control M207 User’s Manual 4.4 Timer Macro Add / Edit Delete To delete your Timer Macros in your Re:control M207. (Please refer to 3.11.2 B. Delete Your Timer Macro on page47.) Re-label To rename your Timer Macros in your Re:control M207. (Please refer to 4.4 Re-label a Device, Key or Text on page48.) View 58 To add or edit your Timer Macros in your Re:control M207. You can setup the Timer for the Macro at the same time. There are 32 sets of Timer Macros you can use. (Please refer to 3.11.2 A.
Chapter 4 Menus 4.5 Duplicate Duplicate You can connect two Re:control M207s with Transmit Wire. (Appendix B P. 71) And then you duplicate the settings in one remote and transfer then to the other one. With the function, you are able to transfer your settings to the other Re:control M207 with Transmit Wire. 1. Please connect two Re:control M207s A and B, by using Transmit Wire. 2. If you intend to transfer the settings in A to the other one, please select the “A” Re:control M207 to start the duplication.
Re:control M207 User’s Manual 6. A message will appear to show the process of the duplication. 7. If the duplication is completed successfully, a message will show up to tell you the completion. If the duplication isn’t successfully please repeat from the step 1 again. If a message “Duplicate Fail” show up, please check out the followings. a. The cable does connect these two remotes precisely. b. The batteries in these remotes does have enough energy.
Chapter 4 Menus 4.6 Calibrate When you feel the Re:control M207’s touch panel is not so sensitive, you can use the function to adjust the touch panel in your Re:control M207 In this way. Besides, the Re:control M207 will also lead you to complete the function when you reset your remote. 1. Please press the button for 1 second to enter Setup Menu. And then enter “ Setting” menu.. 2. Please select “ Calibrate” in the 3rd page in Setting Menu. 3.
Re:control M207 User’s Manual Chapter 5 Install USB Cable and Software 5.1 Install Re:connect USB cable The Re:connect USB cable enables the Re:control M207 to connect with a PC. 5.1.1 Install the Driver 1. Find the SLC-2080 USB_driver from the CD enclosed with the package or download the driver from http://www.revox.de Double click the icon “SLC-2080 USB_driver” to start installation. When the InstallShield Wizard welcome window shows up, please click “Next” to start installation.
Chapter 5 Install USB Cable and Software 2. The program is starting to install the driver. After few seconds, the window shows as below. Please click “Finish” to complete the setup processes. The SLC-2080 USB driver is installed completely.
Re:control M207 User’s Manual 5.2 Install Upgrade Tools Upgrade Tools enables you to upgrade your firmware and pre-programmed codes through the net. 1. Find the program from the CD enclosed with the package or download the program from http://www.revox.de 2. Please double click the icon below to install Upgrade Tools. When you are setting up the program, you will see the window as below. Please click “Next” to go to the next step. 3. Please choose the location you will install the program. 4.
Chapter 5 Install USB Cable and Software 5. If everything is Ok, please click “Install” to setup the program. 6. At this time, you have successfully installed Upgrade Tools. Please click “Finish” to exit the installation.
Re:control M207 User’s Manual 5.3 Upgrade VMCU Firmware and VMCF Pre-programmed Codes With the Re:connect USB cable and Upgrade Tools, you can easily upgrade your Re:control M207 through the internet. There are two types of file you can upgrade: VMCU Firmware and VMCF Pre-programmed Codes. A. VMCU Firmware: The file controls the operation of the Re:control M207. You can load the renewed VMCU Firmware to make your Re:control M207 works better. B.
Chapter 5 Install USB Cable and Software 3. Please select “Data Source” where you will load the files. From Internet: You will download the latest files from our database. From File: If you want to load the previous file, please select the item. Backup Remote: If you want to back up your settings, please select the item. 4. Please click “Get data” button to load the files. An “OK” message will be shown when the process is finished. 5.
Re:control M207 User’s Manual 6. After selecting the “Update type”, just click “Upgrade” button to start the updating process.
Appendix A Features Customization: Users can customize every the size, text, or icon for the button as your will. Pre-Programmed Code: Users can access to the specific codes for their devices from pre-programmed codes.
Re:control M207 User’s Manual Specifications 70 Model Re:control M207 Battery Alkaline batteries 3 x AAA or Ni-MH rechargeable batteries Dimensions 210 (L) x 68 (W) x 24 (H) mm Weight 170g (without batteries) Power Consumption Operation current: 30 ~ 150mA (max) LCD on current: 750µA LCD off current: 20µA Keys 64 Keys / 8 Pages Display Touch liquid crystal display LCD Resolution 160 x 105 black/white dot matrix LCD.
Appendix B Optional Accessories Re:connect USB cable USB Cable Transmit Wire The Re:connect USB cable enables transmission of system setup between a PC and the Re:control M207. With Transmit Wire the Re:control M207 also can duplicate the user setup data for one to another. RemoteComm: With the “RemoteComm” software enables user to customize the remote control, create macros and timers. Upgrade Tools: With the “Upgrade Tools” enables user to upgrade MCU program and Pre-Programmed Code.
Appendix C Troubleshooting Tables Problem Solution LCD does not show anything when you touch it. • • • Batteries may be dead. Replace the batteries with three new AAA Alkaline batteries. Check the batteries are properly installed. The Re:control M207 doesn’t operate a device. • Make sure that the desired device on the Re:control M207 LCD panel has been selected. Move closer to the device. The maximum operating distance is approximately 10 meters (30 feet).
Troubleshooting Tables Problem Macro does not work. Solution • • A key of your existing remote performs two or more functions • The LCD screen turns off. • • • your AV devices: Repeat the learning procedure again. If you still can’t solve the problem, contact us for help. Original remote might not be compatible with learning procedure. Be sure to aim the Re:control M207 at the devices while the macro commands are being sent. Macro was not properly set up. Repeat macro set-up procedure.
