Operating Instructions Revox Joy App S232 1
Revox Joy S232 App Operating Instructions D 1.
Operating Instructions Revox Joy App S232 Welcome ..............................................2 Settings .............................................. 20 Installation ................................................... 2 Requirements .............................................. 2 Number of clients ........................................ 2 Version number ........................................... 2 Sound settings ........................................... 20 Alarm ...............................
Revox Joy S232 App Welcome With Version 2.3 of the S232 App, all of the control functions for Revox Joy products can be done through an iPod touch, iPhone or iPad (referred to here as iDevices). Installation Download the S232 App onto your iDevice from the Apple App Store. Revox offers one App that works with an iPhone, an iPod touch and an iPad. The App has been developed for iDevices running under iOS 5 or higher.
Operating Instructions Revox Joy App S232 Operation Start the App on your iDevice. After a short Welcome view, you will see a Device List, showing all the Revox Joy products found in the network. In our example, a Joy S119 (MK2) and a S120 were found. It is however also possible to operate a Joy S118 or Symphony with the S232 App. You can restart the search for available devices manually by swiping your finger over the screen, from top to bottom. The picture on the right shows the corresponding screen.
Revox Joy S232 App Operating Instructions Switching on through the App Source selection The factory setting for the name that will be shown for a Revox Joy in the Device List is „S118, S119, S120 respectively Symphony“. You can modify this name under Basic settings - Network Network name ID to meet your individual requirements, e.g. "Lounge". You will see a list of all the Revox Joy sources below the name of the device (in this example "S119"), starting with "Last Music".
Operating Instructions Last Music The "Last Music" list contains the last 40 items to have been listened to on the Revox Joy. These can be Internet radio stations or also tracks from your music server. Local sources are not listed here. Navigation is done in the same way as with the "My Music" source. This means that you jump directly from the list to the Play view.
Revox Joy S232 App Creating a queue through lists Navigate to the track selection (list) in the Music Server or USB source where the desired track is located. You can add the selected track, with several options, using the right-hand button : Operating Instructions Creating a queue through Player When you are in the Play view, you can add the track that is currently being played to a queue (or also to the MyMusic selection) using the button.
Operating Instructions Managing the queue You can edit a queue once it has been created. To do this, select the queue as source from the Home folder and tap on . It is irrelevant whether a track from the queue is playing at the time or not. Revox Joy App S232 edit Individual entries can be deleted from the queue with the button. The deletion is actually carried out using the button . You can select from the various options that then appear in the menu: delete Deletes all the contents of the queue.
Revox Joy S232 App save as... In contrast to operation with the S208 Remote control, you can create and administer several queues with the S232 App. The queue that has currently been called can be stored under the same or a different name with the “save as...” option. The blue field is used for the new name whereas saving using an existing name is done through the corresponding grey name field. Operating Instructions open...
Operating Instructions Revox Joy App S232 combine... This option allows you to add the complete contents of a queue to the queue that is currently opened. The new version of the queue should then be saved with the “save as...” option. Cancel Ends queue administration and returns you to the Home menu.
Revox Joy S232 App Operating Instructions My Music Add tracks to My Music You can store up to 18 entries on a Revox Joy in the "My Music" folder. These entries are your individual favourites that you can modify and change at any time. You can add entries to the "My Music" list from a Play view. When you select the "My Music" source, a list with 18 entries is displayed. If you select an entry from the list, the App jumps to the corresponding Play view. The switching process takes a few seconds.
Operating Instructions list. The list is not displayed with the first entry. The entry is automatically assigned to position 1. Revox Joy App S232 Edit My Music From the device list you can select the MyMusic folder With the top right-hand button you can edit the “MyMusic” folder. Using the buttons you can mark an entry for deletion und by confirming your decision the entry will be deleted. If you touch an entry you change into the „edit“ mode to change the name of the entry.
Revox Joy S232 App Operating Instructions Internet Radio If you select the Internet Radio source, you will see the Internet Radio Service selection options as described in the Revox Joy Operating manual. Navigate to find your favourite station by tapping on the corresponding menu item to open a further selection menu. As soon as the editing has been completed, you need to confirm the changes by pushing the top right-hand button again.
Operating Instructions Once you have scrolled to the end of the list, by swiping your finger over the edge of the screen, the list is reloaded. Revox Joy App S232 If a radio station or a podcast is selected from the list, the App switches to the corresponding Play view. In the case of very long lists, a column is displayed on the right with the letters of the alphabet. When you tap on a letter, the App jumps to the corresponding selection.
Revox Joy S232 App Using the Skip button, you can move from one station to the next within the last menu. If there is only one entry in a menu, no Skip can be carried out. Using the Archive button in the Task bar or top left, you can always jump to the archive of the currently selected source, in order make a new selection from the current source. Operating Instructions FM Tuner / DAB+ The DAB+ and FM Tuner selection is only available if the optional Tuner module is installed.
Operating Instructions Revox Joy App S232 Station information FM / DAB+ Status info with RDS FM Tuner • Station name (PS= Programme Service Name) • Radio text, programme information (RT = Radio Text) • FM Logo • Mono/stereo switching with Shuffle button • PTY = Programme Type • Station frequency Selecting a station switches you to the Play view.
Revox Joy S232 App Operating Instructions Audio Server If you select Music server from the Source menu, you first see a menu of all the UPnP services found in the network. Navigate to your music in the usual way by tapping on a menu entry. In some lists, the album cover is shown in front of the text. Whether a cover is displayed is entirely dependent on the UPnP service that you use to access your music collection and on whether a cover was stored during ripping.
Operating Instructions Revox Joy App S232 Using the Skip buttons, you can jump to the previous or the next track from the last menu. If you press and hold the Skip back button for longer than 2 seconds, the current track starts playing again and you can only access the previous track by pressing the button again briefly. Once the end of the list has been reached, pressing the Skip button again reveals the previous menu and quits the Play view.
Revox Joy S232 App Operating Instructions USB iPod Selecting the USB source gives you access to a USB storage medium. Unlike a NAS or PC with an installed UPnP service, a USB storage medium is just a collection of data. If you select the iPod source, the music on an iDevice connected to a Revox Joy is accessed. When navigating through a USB storage medium, you see a file structure like the one you would see on a PC.
Operating Instructions Revox Joy App S232 Local Inputs Play view You can switch to the up to six local inputs from the Source menu. After a defined time, the App jumps back from most menus to the corresponding Play view. When selecting a local input, an immediate switch is made to the Play view, which gives you information about the selected source and allows the volume level to be controlled.
Revox Joy S232 App Operating Instructions Settings Sound settings You will also find a "Settings" button in the Menu bar with the latest version of the S232 App. You can access all Joy product configuration menus through this button. You can adjust the treble, bass and balance levels of the Joy product through Sound settings.
Operating Instructions Revox Joy App S232 Alarm A Revox Joy has two alarm clocks. These offer the option of switching on a Joy product at preset times, with a particular source and at a selected volume. You can configure the corresponding alarm settings with the two Alarm clock menus. The status of the alarm clock is shown in small grey letters underneath the menu entry. You can select the day(s) of the week when the alarm should be activated from the weekday list.
Revox Joy S232 App button. The current status is displayed and "On" means that the alarm clock is activated. Operating Instructions Sleep-Timer Using the Sleep timer, you can define a time period up to 120 minutes after which the Joy should go into stand-by mode. Short-Timer The Joy has a short-term timer function. Using the relative time, the system gives you a list of relative and wake-up times. Select the corresponding entry.
Operating Instructions Revox Joy App S232 Basic settings Speaker setup Further Joy menu items can be called from the Basic settings menu item. As a rule, settings that don't have to be changed again are made through these menus. The Revox Joy offers you the option of adjusting the frequency response in such a way as to optimise the interaction between the speakers. You can select the speaker type and location through lists.
Revox Joy S232 App FM Radio If the optional DAB+/FM Tuner module is installed, this menu can be used for searching tuner stations. Operating Instructions before starting Automemory, in order to avoid accidental deletions. A progress bar shows you how much of the station search has been completed. The automatic station search cannot be interrupted. Manual station search Stations can be added manually using the < + > buttons. Start the process with the two arrow buttons.
Operating Instructions DAB+ Radio If the optional DAB+/FM Tuner module is installed, this menu can be used for searching tuner stations. Revox Joy App S232 A progress bar shows you how much of the station search has been completed. The automatic station search cannot be interrupted Deleting and sorting the stations is done in the List view of the DAB+ source. The DAB+ entry can be hidden in the Source list with the “Show DAB+ radio" switch if, for example, only the FM tuner is being used.
Revox Joy S232 App Local inputs Revox Joys have up to six classic audio inputs. These can be given individual names using the S232 App. When the menu is called, the S232 App shows a list of all the local inputs. If you want to change a name, swipe across the entry to the right. Type the new name into the white field on the page that opens. You transfer the new name to the list with the "Done" key on the keypad or with "Accept".
Operating Instructions Revox Joy App S232 Network One of the most important menus when configuring the Revox Joy is the menu for the Network settings. The Joy is factory-set for Plug&Play recognition in the network using DHCP through the LAN. Network status Information about the network status of the Joy can be called up through this menu item. You will see whether the connection is done using LAN or Wi-Fi, along with the IP address, the Subnet mask, the Gateway and the MAC address.
Revox Joy S232 App Wi-Fi settings If the Joy is to be operated in a Wi-Fi network, a LAN connection is required for the initial configuration. Please ensure that Wi-Fi connections is switched off if the LAN connection is active. Enter the SSID, the security key and the password. Operating Instructions Once the Joy can be accessed over the Wi-Fi, further changes can be carried out on the Wi-Fi without the Joy having to be disconnected from the network.
Operating Instructions Revox Joy App S232 Software update Remote Access You can query the current software version of the Revox Joy though this menu. If required, the software can be updated through this page. The Joy can be controlled through UPnP Control points. Remote access has to be activated for this to be possible. To do this, tap on the "Update" button. An information dialogue offers you the option of doing the update over a USB connection or through the Internet.
Revox Joy S232 App Operating Instructions Auto Standby Language When the Joy has reached the end of a playlist for example and is idling, it can switch automatically to the Standby state after 20 minutes if this option is activated. Finally, you can set the language of the Joy. Tap the button with the current language and you are presented with a list of the languages available on the Joy. Select the desired language.
Operating Instructions Revox Joy App S232 Display modes By turning the iDevice clockwise through 90°, a landscape view can be displayed instead of the default portrait view. The functions are the same as with the portrait view. Only the layout of the screen is changed to fit the landscape format. Special cases If a source is not available, e.g. a USB stick is not plugged in or an iPod is not connected, the Music server source is shown as a rule.
Revox Joy S232 App Operating manual / Part no.: 10.30.
