Operating instructions

Operating Instructions Revox Joy App S232
23
Basic settings
Further Joy menu items can be called
from the Basic settings menu item. As a
rule, settings that don't have to be
changed again are made through these
menus.
But also, the App often shows important
information below the corresponding
entry, so that you can find this
information out at a glance.
Speaker setup
The Revox Joy offers you the option of
adjusting the frequency response in
such a way as to optimise the interaction
between the speakers. You can select
the speaker type and location through
lists.
In the case of the Revox Joy S118, you
can activate the limiter from this menu.
The Revox Joy S119 and S120 offer a
menu here for adjusting the subwoofer*
output.
*Phase-linear behaviour
Revox sends a phase-linear subwoofer
signal to the speaker outputs. In order to
achieve an optimum addition of
subwoofer and speaker level in the
transfer range, you should set the phase
regulator at the subwoofer electronics to
0° and select a cut-off frequency of 120
Hz.